Low-Cost Sensor
Basic Features Sensor
Full-Featured Sensor
Dual-Point Sensor
Full-Featured Sensor with Remote Electronics
Multi-Point Sensor with Remote Electronics
Level Transmitter
Multipoint Float Level Switch
RADAR Level Transmitter
Dust Emission Flow Switch
Dust Emission Flow Transmitter
Bag House and Dust Collector Differential Pressure Sensor
Bag House and Dust Collector Filter Monitor and Cleaning Cycle Control Panel
Bag House and Dust Collector Filter Sensor Transmitter
High/Low level switches used for automatic filling of a
tank.In a plant dust collection system, reliable sensing and control is necessary for plant safety and for environmental concerns. The Babbitt International model BPS-400 sensor provides a non-clogging, reliable way to sense dirty filter bags. The BPS-402 controller displays the differential pressure, alarms on high differential pressure and initiates the cleaning/back-wash system.
In the above diagram, the sensor is mounted on the dust collector wall. The linear output of the sensor is read by the controller. The sensor signal is connected to the control panel through intrinsically-safe barriers. The NEMA 4 controller has 2 relay contact outputs used to: 1) Activate a remote alarm device on a High dP condition, telling the operator to check the system for clogged filter bags; and 2) Initiate the cleaning/backwash cycle of the system. The controller provides indicator lights to show alarm status and to show that the cleaning cycle has been initiated. The controller also provides a 4-20mA analog ouput for recording or additional monitoring by the plant PLC or DCS.
The BPS-400 sensor can be mounted on the side of the dust collector, or directly on the tube sheet if a space is available. The BPS-400 design features a food-grade silicone diaphragm on the "dirty" side and teflon impregnated fabric on the "clean" side.
The unit has a range of 0-14 inches W.C. with a very fast response time. The strain-gauge technology means accurate readings and no ports to clog.
Advantages:
Pricing: About $2500.00.
Includes: BPS-400 sensor and BPS-402 controller. Other specifications are
available.
We invite you to contact us with your next application.