LT 9000: Continuous Level Transmitter for Interface and Liquid Level Control

The LT9000 is a continous level transmitter that detects the level of an electrically conductive liquid in a tank or other vessel. The LT9000 can also sense the level of an interface such as oil/water.

The basic unit is made of a solid stainless steel probe, attached to an explosion proof housing. The probe is coated with a non-conductive material such as Ryton, Halar or Teflon. Inside the explosion proof housing are all calibration adjustments and sensing electronics.

LT 9000 Continuous Level Transmitter for Interface and Liquid Level Control

The isolated 4-20 mA output signal can drive a load of up to 1000 ohms. The zero and span can be set over the entire length of the probe or any portion of the probe.

PDF Brochure - These are large files and download speeds vary.

Application Performance Guarantee

If within 60 days of purchase, the LT9000 does not perform according to our claims and was properly installed in an approved application that does not exceed the stated performance specifications, the LT9000 may be returned for full credit.

Features

4-20 mA output
Totally self-contained
Temperature stable electronics
On Board fuse protection
Fully isolated output
Simple installation and calibration
Modular electronics easily replaced
Explosion proof housing standard
Two year warranty

Electrical:
Power:	115VAC (+/- 15%) 50/60Hz, or 24VDC
Output:	4-20 mA into a load of 1K ohm max
Fuse:	On-board 5A @ 125 volts
Frequency:	10,000 Hz to 300,000 Hz
Environmental:
Hazardous Area:	Class I, Group D. Class II, Group E,F,G.
Temperature:	Probe: -30 deg F to +340 deg F - Halor Probe: -30 deg F to +450 deg F - Ryton Electronics: -40 deg F to 185 deg F
Pressure:	1500 psi @ 75 deg F.
Construction:	Probe: All wetted parts 316SS, Viton, Teflon and coating material Electronics: Housed in cast aluminum explosion-proof enclosure.

Specifications are subject to change without notice.

We invite you to contact us with your next application.